A few of the most frequent home inspection FAQs is the focus of this article. The real estate sales market has toned down dramatically since the 80’s, yet now in the mid 2010’s there are clear signs of renewed home buyer activity and care in the purchase of homes.
Home inspectors have reported a significant increase in the number of pre-purchase inspections, according to the American Society of Home Inspectors (ASHI), the most respected national organization of independent home inspectors…
Home Inspection FAQ’s – Most Common Problems Buyers Can Expect
In homes 20 years and older, ASHI experts say that roof shingles, electrical wiring, and surface water drainage systems are the items most commonly cited on inspection reports as needing repair or modification.
In new construction, inspectors frequently find water seepage into basement/cellar or crawl space, inadequate attic ventilation, poor roof construction, and substandard masonry and finish work.
Home Inspection FAQs – Environmental Hazards in the Home
One of the home inspection FAQs we hear these days is in response to a growing awareness of the dangers posed by certain substances, such as radon gas, asbestos fiber, and urea formaldehyde foam insulation, as well as the hazards associated with mold found in a home. Many consumers are paying extra to have special tests performed to make sure their new home doesn’t pose a health hazard to them and their family. Although a standard ASHI home inspection does not include environmental items, many home inspectors offer environmental assessment as an optional service, or recommend further evaluation.
Home Inspection FAQs – Difference Between Home Inspections and Engineering Inspections
…and which is appropriate for the Kansas City home buyer?
Considerable confusion surrounds this question, particularly since in some areas, home inspections have been inadvertently referred to as engineering inspections or evaluations, and engineers sometimes perform home inspections. But the two, according to home inspection and engineering authorities, are actually quite different.
Engineering evaluations are usually specialized by discipline (such as chemical, structural, electrical) and involve exhaustive scientific measurements and calculations for confirming the design of the systems. Home inspections, on the other hand, tell buyers what they really need to know: “what is the condition of the home today?” The home inspection, performed by a professional engineer (P.E.) or a non-engineer professional inspector does not involve engineering analysis of the original design, but deals instead with the in-service operation or failure of a home’s systems and components, as well as the type of maintenance that has been and should be performed. It is based on established criteria of performance and training specific to the home inspection profession.
Home Inspection FAQs – Who is Qualified to Conduct Home Inspections?
Many state agencies, which are typically responsible for regulating professional activity, have not undertaken to license home inspectors. Home buyers must therefore carefully review an inspector’s background and credentials to determine if he has the appropriate training and professional ethics to perform home inspections.
Contact T.J. Lamb about any home inspection FAQs you may have before buying a home in Kansas City.
This Home Buying Tip was excerpted from:
Banker & Tradesman, May 1997, Updated 2009